YEFE Bendax MoS2-G 1 is an advanced high-temperature bentonite-thickened lubricating grease enriched with both molybdenum disulfide (MoS2) and graphite as dual solid lubricants, formulated with virgin mineral base oil for the most demanding industrial applications. This unique combination delivers three layers of lubrication protection: the bentonite thickener provides exceptional thermal stability with no practical dropping point, while MoS2 and graphite solid lubricants ensure superior anti-wear, anti-seizure, and film retention performance even under extreme pressure and boundary lubrication conditions.

Designed for applications where both extreme temperatures and very high loads are simultaneously present, Bendax MoS2-G 1 excels in open gear systems, heavily loaded slow-speed bearings, and industrial equipment operating in high-heat environments. The soft NLGI 1 consistency allows for easy application and penetration into tight clearances and hard-to-reach lubrication points.

This grease is the go-to solution for heavy-duty industrial operators who need a thermally stable, high-load-carrying, solid-lubricant-enhanced grease that will not break down under the combined stresses of extreme temperature, heavy pressure, and slow-speed operation.

YEFE Bendax MoS2-G 1 combines a bentonite (organoclay) inorganic thickener with virgin mineral base oil and incorporates both MoS2 and graphite as dual solid lubricants, creating a multi-layer lubrication system specifically engineered for extreme conditions.

The bentonite thickener gives this grease a practically unlimited dropping point, meaning it retains its structural integrity and lubricating properties at temperatures where conventional soap-based greases would melt and fail. This makes it inherently superior for sustained high-temperature service in industrial equipment such as kilns, furnaces, and high-heat processing machinery.

MoS2 particles form a low-friction protective layer on metal surfaces at the microscopic level, significantly reducing wear and the risk of seizure under very high contact pressures and boundary lubrication conditions. Graphite complements MoS2 by providing additional lubrication in high-temperature zones where MoS2 alone may be less effective, together creating a robust dual-solid lubricant protection system.

The NLGI 1 soft consistency facilitates application in open gear systems, large slow-speed bearings, and other components where grease must penetrate into contact zones effectively.

Bendax MoS2-G 1 meets the following classifications:

• ISO 12924: L-XA(F)CHB1

• DIN 51502: OGF1K-10

Application Category / Recommended Use
High-temperature bentonite grease with MoS2 and graphite for heavily loaded open gear systems, slow-speed large bearings, and industrial equipment requiring both extreme heat resistance and superior solid lubricant protection simultaneously.

Usage Type
Specialty high-temperature solid-lubricant grease for direct manual or spray application on open gears, large plain and rolling bearings, and other heavily loaded components in high-temperature industrial environments where standard greases cannot perform.

Surface / Component Type
Open gears, rack and pinion systems, large slow-speed bearings, heavily loaded plain bearings, slides, and high-pressure contact surfaces in kilns, rotary equipment, steel mills, cement plants, and other high-temperature heavy industry machinery.

Key Function
Provide a multi-layer lubrication system combining bentonite thermal stability, MoS2 anti-wear and anti-seizure protection, and graphite high-temperature solid lubrication to deliver reliable performance under the combined challenges of extreme heat, very high loads, slow-speed operation, and boundary lubrication conditions.

Operating Conditions
Designed for use within the OGF1K-10 temperature range, in continuous or intermittent high-temperature environments, under very heavy loads and slow-speed heavy-pressure conditions, in industrial settings such as steel mills, cement plants, glass manufacturing, mining equipment, and heavy manufacturing.

Target Users
Industrial maintenance engineers, plant operators, and maintenance teams in heavy industries including steel, cement, glass, mining, and heavy manufacturing requiring a premium high-temperature solid-lubricant grease for open gear systems and heavily loaded bearings in extreme operating conditions.